TEEVEE SUPPLY

VELLEMAN TEST EQUIPMENT

APS230 ADVANCED PC OSCILLOSCOPES



SPECIAL WEB PAGE PRICE
$649.95
Features	Specifications
2 input channels	input impedance: 1 Mohm / 20pF
high contrast LCD with white backlight	bandwidth: 2 x 30MHz
full auto set-up for volt/div and time/div	sampling: 240MS/s per channel
recorder roll mode, up to 170h per screen	step markers for voltage, time, ...
trigger mode: run - normal - once - roll ...	vertical resolution: 8 bit
adjustable trigger level and slope	sensitivity: min. 30µV
peak measurements: max, min. and pk to pk	volts per division: 1mV to 20V/div
measurements: rms, dB(rel), dBV, dBm and dBG	time base: from 25ns to 1 hr/div
Direct Audio power measurements	AC/DC input coupling selection
x1 and x10 probe calculation option	RS232 communication with PC
several display modes	dimensions: 9.1" x 5.9" x 2.0"
StereoScope mode for audio measurement	weight: 30oz. incl. battery
X and Y position shift
battery pack included, fast charge possible

HPS10SE HANDHELD PERSONAL OSCILLOSCOPES




The Velleman Personal Scope is not a graphical multimeter but a complete portable oscilloscope at the size and the cost of a good multimeter. Its high sensitivity - down to 0.1mV/div - and extended scope functions make this unit ideal for hobby, service, automotive and development purposes. Because of its extreme value for money, the PersonalScope is well suited for educational use in schools and colleges. Suitable for measurements on audio equipment, mains voltage applications, digital signals, all kind of sensors, signal analysis in automotiveapplications,car stereo, etc…
Its full auto setup function, makes measuring waveforms very easy.
SPECIAL WEB PAGE PRICE
$169.95
Features
10MHz sampling rate	DVM readout with x10 option
0.1mV sensitivity	audio power calculation (rms and peak)
up to 2MHz analogue bandwidth	dBm, dBV, DC, rms ... measurements
5mV to 20V/div in 12 steps	signal markers for Volt and Time
200ns to 1hour/div time base in 32 steps	frequency readout (through markers)
full auto set up	recorder function (roll mode)
trigger mode: run, normal, once, roll, slope +/-	signal storage (2 memories)
X and Y position signal shift	up to 20h on alkaline batteries
LCD: 128x64 pixels / high-contrast	blue lcd,white backlit
hard carry case included

specifications
power supply: 5 x 1.5V AA battery or Nicd / NiMH (not incl.)
includes battery charging circuit

HPS40 HANDHELD PERSONAL OSCILLOSCOPES


Our goal with the HPS40 was to develop a user-friendly, feature-packed and genuinely "hand-held" oscilloscope. A number of characteristics were on our wish list: low noise, high sensitivity, modest weight, a backlit LCD and a choice between regular batteries or rechargeable ones. Furthermore, the scope also offers a selection of 5 different screen layouts. Both novices and professional users will admire the fast and fully automatic setup function, allowing them to perform measurements without physically touching the unit! Floating measurements are completely safe thanks to the battery-powered operation and the (included) fully insulated measuring probe. These features make the HSP40 indispensable to the professional user, service centers and even to the hobbyist.

SPECIAL WEB PAGE PRICE
$289.95


Features
40MHz sampling rate	audio power calculation (rms and peak) in 2, 4, 8, 16 & 32 ohm
12MHz analog bandwidth	dBm, dBV, DC, rms ...measurements
0.1mV sensitivity	signal markers for Volt and Time
5mV to 20V/div in 12 steps	frequency readout (through markers)
50ns to 1hour/div time base in 34 steps	recorder function (roll mode)
full auto set up	signal storage (2 memories)
adjustable trigger level	high resolution LCD 192x112 pixels
X and Y position signal shift	LCD backlight
DVM readout	optical isolated RS232 output for PC
Contains:
insulated safety probe	user manual
RS232 connection lead (to DB9)	flexible carry protection holster
handy rigid carry case
Specifications
power supply: 5 x AA battery or Nicd / NiMH includes battery charging circuit adaptor: 9V/ 500mA